Kali下的Osmocom-BB GSM-SMS 嗅探
本文为看雪论坛精华文章
看雪论坛作者ID：kernelwolf
GSM Sniffing入门：
网络上找得到的几处资料都或多或少存在一些错误或者没讲清楚的地方，可能原作者在修正错误后没有把过程写进去。无法找到某些资料原作者是谁了，只能在此表示感谢！
关于系统，虽然几个主流系统都可以，但是还是觉得Kali舒服，之前用别的系统出了好几个莫名其妙的错误。我这里用的是Win7_x64下VMware_10.0.0运行Kali_x64的VMware版镜像。
(1)添加源。vim看着就不舒服，用Leafpad直接开终端：
leafpad /etc/apt/sources.list
deb http://mirrors.ustc.edu.cn/kali kali main non-free contrib
deb-src http://mirrors.ustc.edu.cn/kali kali main non-free contrib
deb http://mirrors.ustc.edu.cn/kali-security kali/updates main contrib non-free
apt-get update
aptitude install libtool shtool autoconf git-core pkg-config make gcc
apt-get install build-essential libgmp3-dev libmpfr-dev libx11-6 libx11-dev texinfo flex bison libncurses5 \
libncurses5-dbg libncurses5-dev libncursesw5 libncursesw5-dbg libncursesw5-dev zlibc zlib1g-dev libmpfr4 libmpc-dev
wget -c http://bb.osmocom.org/trac/raw-attachment/wiki/GnuArmToolchain/gnu-arm-build.2.sh
chmod +x gnu-arm-build.2.sh
mkdir build install src
cd src/
wget http://www.gnuarm.com/bu-2.16.1_gcc-4.0.2-c-c++_nl-1.14.0_gi-6.4_x86-64.tar.bz2
wget http://ftp.gnu.org/gnu/binutils/binutils-2.21.1a.tar.bz2
wget ftp://sources.redhat.com/pub/newlib/newlib-1.19.0.tar.gz
cd ..
./gnu-arm-build.2.sh
echo "export PATH=\$PATH:/root/install/bin">/root/.bashrc
source /root/.bashrc
cd ~
git clone git://git.osmocom.org/libosmocore.git
cd libosmocore/
autoreconf -i
./configure
make
make install
cd ..
.ldconfig
git clone git://git.osmocom.org/osmocom-bb.git
cd ~/osmocom-bb
git checkout --track origin/luca/gsmmap
cd src
git pull --rebase
make
(6)出现错误？(我没遇到任何错误，下面收集两个来自网络的错误)
/root/osmocom-bb/src/target/firmware/include/asm/swab.h: Assembler messages:
/root/osmocom-bb/src/target/firmware/include/asm/swab.h:32: Error: no such instruction: `eor %edx,%ecx,%ecx,ror’
make[4]: *** [gsmtap_util.lo] 错误 1
make[4]: Leaving directory `/root/osmocom-bb/src/shared/libosmocore/build-target/src’
make[3]: *** [all] 错误 2
make[3]: Leaving directory `/root/osmocom-bb/src/shared/libosmocore/build-target/src’
make[2]: *** [all-recursive] 错误 1
make[2]: Leaving directory `/root/osmocom-bb/src/shared/libosmocore/build-target’
make[1]: *** [all] 错误 2
make[1]: Leaving directory `/root/osmocom-bb/src/shared/libosmocore/build-target’
make: *** [shared/libosmocore/build-target/src/.libs/libosmocore.a] 错误 2
tar xf bu-2.16.1_gcc-4.0.2-c-c++_nl-1.14.0_gi-6.4_x86-64.tar.bz2
mv gnuarm-* ~/gnuarm
export PATH=~/gnuarm/bin:$PATH
make[1]: *** [board/compal_e88/hello_world.compalram.elf] 错误 1
make[1]: Leaving directory `/root/osmocom-bb/src/target/firmware’
make: *** [firmware] 错误 2
git clean -dfx
make
MOTOROLA_C118手机
CP201X(USB to TTL)
数据线(2.5mm耳机头转杜邦线)如果自制有的需要用刀把接头处切掉一圈才能完全插进去
lsmod | grep usb
(2)在A中粘贴命令：
cd ~/osmocom-bb/src/host/osmocon/
./osmocon -m c123xor -p /dev/ttyUSB0 ../../target/firmware/board/compal_e88/layer1.compalram.bin
cd ~/osmocom-bb/src/host/layer23/src/misc/
./cell_log -O
(4)切换到C终端，粘贴命令：
cd ~/osmocom-bb/src/host/layer23/src/misc/
./ccch_scan -i 127.0.0.1 -a 刚才的ARFCN
(5)切换到D终端，粘贴命令：
wireshark -k -i lo -f 'port 4729'
看雪ID：kernelwolf
https://bbs.pediy.com/user-620702.htm
推荐文章++++